1) Specification Sheet:
| Part Number | Description | O.D | I.D | Width | Carbide | Suitable for Scarifier / Planners |
| Y1005 | small 5pt | 43mm
1.69" | 16mm
0.63" | 6mm
0.236" | 4*8.5mm | Von Arx® - FR200
Von Arx® - VA25 - 12mm
Airtec® - RT - 2000
SASE® - SC10E - 12mm
MK® - SGII / SG5 / SG9
Sase® - SC8E | Bartell® - SP8
General Equipment® - SP8
Kut-Rite® - KR8
Blastrac BMP-215 SCARIFIER
Trelawny TFP 200 RANGE |
| Y1006-1 | small 6pt | 47mm
1.85" | 15.5mm
0.61" | 6mm
0.236" | 4*8.5mm | Edco® - CPM-4 / CPM-8 Edger
Edco® - CPM-8
Edco® - CPL-8
Edco® - CPM-10 - 1/2"
MK® - SGII / SG5 / SG9
Smith® - SPS8 - 1/2"
Von Arx® - FR200 | Airtec® - RT - 2000
Airtec® - ES - 200
SASE® - SC10E - 12mm
Diteq® - G00007
Diteq® - G00008
Von Arx® - VA25 - 12mm |
| Y1006-2 | medium 6pt | 56.6mm
2.228" | 18mm/0.709"
25mm/0.984" | 6mm
0.236" | 4*8.5mm | Von Arx® - VA25 - 9/16"
Target Mini Planer® - MPL - 55H - 1/2"
Target Mini Planer® - MPL - 55H - 3/4" | Target Mini Planer® - MPL - 9H - 1/2"
Target Mini Planer® - MPL - 2E - 1/2"
Target Mini Planer® - MPL - 9H - 3/4"
Target Mini Planer® - MPL - 2E - 3/4" |
| Y1008E | mini 8pt | 35.5mm
1.398" | 12mm
0.472" | 6mm
0.236" | 4*8.5mm | Smith® - FS050 | |
| Y1008F | small 8pt | 58.3mm
2.295" | 17.6mm/0.693"
20mm/0.787" | 6mm
0.236" | 4*8.5mm | Kut-Rite® - KR10
Sase® - SC10E - 9/16"
Smith® - SPS8 - 9/16"
Diteq® - G00007
Diteq® - G00008
Smith® - SPS8D - 3/4"
Smith® - SPS10D - 3/4"
Edco® - CPM-10 - 5/8"
EGM 25-10 Smith - SPS8D - 3/4" | Smith® - SPS10 - 9/16"
Target Mini Planer® - MPL - 55H - 1/2"
Target Mini Planer® - MPL - 9H - 1/2"
Target Mini Planer® - MPL - 2E - 1/2"
Blastrac - BMP-265 SCARIFIER
Trelawny-FLOOR SCARIFIER TFP 260 RANGE |
| Y1008B | medium 8pt | 60.3mm
2.374" | 20mm/0.787"
25mm/0.984" | 6mm
0.236" | 4*8.5mm | Airtec® - RT - 2500
Airtec® - RT - 2500 Duo
Airtec® - RT 3200
Airtec® - RM 320 | Target Mini Planer® - MPL - 55H - 3/4"
Target Mini Planer® - MPL - 9H - 3/4"
Target Mini Planer® - MPL - 2E - 3/4" |
| Y1008C | large 8pt | 68mm
2.677" | 26mm
1.024" | 6mm
0.236" | 4*8.5mm | | |
| Y1008A | super 8pt | 82.8mm
3.26" | 30mm
1.181" | 8mm
0.315" | 4*8.5mm | Edco® - CPU-12
Sase® - SC12E
Von Arx® - VA30
Trelawny-FLOOR SCARIFIER TFP 320 | Edco® - CPU-10FC
Airtec® - RT 3200
Airtec® - RM 320
Blastrac - BMP-335 SCARIFIER |
| Y1012A | large 12pt | 80mm
3.15" | 26mm/1.024"
30mm/1.181" | 8mm
0.315" | 4*8.5mm | Kut-Rite® - TKO-2513
MRL® / Arrow® - Grinder Trucks
Kut-Rite® - KR13 | Airtec® - RT 3200MRL® / Arrow® - Grinder Trucks
Airtec® - RM 320
Blastrac - BMP-335 SCARIFIER |
Various tool replacement optional:
Scarifier Milling Cutters are utilized for removing thick and soft materials such as mastic, thermoplastic, waterproofing mem-branes, cold plastic coatings, glues and the like. It leaves the surface smooth and ready for preparation, and is often used to remove the bulk of material prior to using a carbide-tipped cutter. Utilize the Milling Cutter for traffic line removal, epoxy removal, thermoplastic removal, waterproofing membrane removal, cold plastic coatings removal and general scarification. Long lasting, removes all types of materials and leaves a smooth finish. Fits all machines
Steel Cutters are the most economical tools in the market, and leave a long-lasting smooth finish. They are ideally used on lighter prepa-ration work while getting ready for coating applications or removal of surface materials like carpet foam backing, adhesives, mastics, glues, rust from steel decks and some thin mill coatings. Good for general cleaning of concrete and asphalt surfaces, traffic line removal, paint and light coating removal, adhesives removal, stripping of compacted dirt, grease and oil deposits and de-rusting, de-scaling and ship decks. Available in blunt or sharp tooth configurations and fits all machines.
Where to use
General cleaning of concrete and asphalt surfaces.*
Traffic line removal.
Paint and light coatings removal.
Adhesives removal.
Stripping of compacted dirt, grease and oil deposits.
De-rusting, de-scaling on ship decks.
Why choose us
Inexpensive.
Versatile; do most jobs.
Leave an extremely smooth surface.
Last longer, save downtime vs. other steel cutters.
Especially effective on layered dirt and grease.
Available in blunt or sharp tooth configurations.
Fit all machines.
Support:
If you are a construction contractors or tool rental company, we will be able to provide all kinds of tools replacement for your concrete milling scarifiers, floor grinding machines or floor planers for you.
Contact information:
Carly Yuan/ Export Director
Zhuzhou Xinhe Industry Co.,Ltd
Add: No.9 Zhongda Road, Tianyuan District, Zhuzhou, Hunan,China
